Windows 95/98 Network; Quick Install Steps - Xerox DocuPrint N4525 Network Installation Manual

Windows 95/98 Network

Quick install steps

1. Insert your printer's CD-ROM into your computer's CD-ROM
drive. If your PC is set to autorun, a CD Navigator Utility should
automatically start. If it does not start, then:
a. Click Start and Run.
b. In the Run window, type: <CD drive>:\SETUP32.EXE.
2. Select your desired language from the available list.
Printer driver installation
3. Install the printer drivers for your printer. Within CD Navigator,
select Printer Drivers, and then select Install N4525 Printer
Drivers.
Note
The Xerox TCP/IP Port Monitor has not been installed yet. It
is necessary to temporarily install the printer drivers to an
alternate port. A local port, such as LPT1, is recommended.
4. Run the TCP/IP Port Monitor Setup program located on your
printer's CD-ROM:
a. Click Start and Run.
b. In the Run window, type: <CD drive>:\instal\utility\Tcp Ip
Port Monitor\Windows 9x\<language>\setup.exe.
5. On the first dialog box, select Install/Upgrade Port Monitor and
click OK.
Port monitor installation
6. The installation process automatically copies the files to the
system directory. When this process is completed, a dialog box
appears that reads: The Xerox TCP/IP Port Monitor was
successfully installed. To add or remove ports, select the ports
tab in your printer properties.
7. Click OK.
Quick Network Install Guide
3