Xerox DocuPrint N4525 Network Installation Manual page 21

4. If the TCP/IP software is not present, install it using the
documentation provided by Microsoft, and then return to this
document.
5. Open the Control Panel and double-click the Printers icon.
Double-click Add Printer; the Add Printer Wizard starts.
6.
7. Click Next>.
8. Click the Local Printer radio button.
Click Next>.
9.
Click the Create a New Port radio button.
10.
11. Select Standard TCP/IP Port from the New Port Type pull-down
menu.
Click Next>.
12.
13. The wizard now starts the TCP/IP port wizard, click Next>.
14. Click in the Printer Name or IP Address edit box, and type in the
IP Address of the printer you want to use.
Click Next>.
15.
16. On the Confirmation window, click Finish if the data is correct. If
the data is not correct, click the <Back button to correct any
errors.
17. Insert your printer CD-ROM into your computer's CD-ROM drive
and click Have Disk.
18. Click the Browse button and select the directory containing the
Windows 2000 drivers.
19. Select the *.INF file, then click Open.
20.
The Wizard returns you to the previous dialog. Verify that the
path and filename are correct, and click OK.
21. At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, and then click Next>.
22. If the printer is not shared, click Next>. To share the printer, enter
a Share Name, check the share checkbox, and then click Next>.
23. At the next dialog, it is recommended that you print a Test Print.
Click Next>.
Quick Network Install Guide
15