Xerox DocuPrint N4525 Network Installation Manual page 26

14. Choose the Port Address from the list of ports.
Click Timers and verify that the Job Based connection is selected,
15.
and then click OK.
16. Insert your printer CD-ROM into your computer's CD-ROM drive
and click Have Disk.
17. Click the Browse button and select the directory containing the
Windows 2000 drivers.
18. Select the *.INF file, then click Open.
19. The Wizard returns you to the previous dialog. Verify the path
and filename are correct and click OK.
20. At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, and then click Next>.
21. If the printer is not be shared, click Next>. To share the printer,
enter a Share Name, check the share checkbox, and then click
Next>.
22. At the next dialog, it is recommended that you print a test page.
Click Next>.
23. The Completing the Add Printer Wizard window appears. If all
the data presented is correct, click the Finish button. If not, click
the <Back button to correct any errors.
24. Wait for the test print to print. A new dialog asks for confirmation
of the test print, click Yes.
25.
Send a print job to the printer.
26.
Check the print job for print-quality. If print-quality problems
exist, use the print quality section of your printer Advanced
Features and Troubleshooting Manual to correct the problem.
27. If your print job did not print, see the Troubleshooting section for
your operating system in the Advanced Features and
Troubleshooting Manual to correct the problem.
20
DocuPrint N4525 Network Laser Printer