Xerox DocuPrint N4525 Network Installation Manual page 17

Choose the Port Address from the list of ports.
10.
11. Click Timers and verify that the Job Based connection is selected,
and then click OK.
Click OK. The Wizard returns you to the previous dialog. Verify
12.
the new port name you entered is in the list and correct. The
check box to the left of the port name must be checked if it is not,
check it, and then select Next>.
13. Insert your printer's CD-ROM into your computer's CD-ROM
drive and click Have Disk.
Click the Browse button and select the directory containing the
14.
Windows NT drivers.
15. Select the *.INF file, then click Open.
16. The Wizard returns you to the previous dialog. Verify the path
and filename are correct and click OK.
17.
At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, and then click Next>.
If the printer is not shared, click Next>. To share the printer, enter
18.
a Share Name, check the share checkbox, and then click Next>.
19.
At the next dialog, it is recommended that you print a test page.
Click Finish.
20. Wait for the Test Print to print. A new dialog asks for
confirmation of the test print, click Yes.
21.
Send a print job to the printer.
22. Check the print job for print-quality. If print-quality problems
exist, use the print quality section of your printer Advanced
Features and Troubleshooting Manual to correct the problem.
23.
If your print job did not print, see the Troubleshooting section for
your operating system in the Advanced Features and
Troubleshooting Manual to correct the problem.
Quick Network Install Guide
11