Configuring Docuprint As An Rprinter - Xerox DocuPrint 92C Installation Planning Manual

Configuring DocuPrint as an RPRINTER

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
The following is a summary of the tasks to perform if you configure
the DocuPrint NPS as an RPRINTER:
•
Novell tasks:
— Sign on to the Novell workstation as a network
administrator.
— From PCONSOLE, create a Printer Queue (for example,
Gazette) and a Print Server (for example, PGazette).
— From the Print Server window, configure a printer for
PSERVER using the Printer Configuration option.
— Type any name (for example, Gazette) for the printer.
Select Remote Other/Unknown type for the printer and
save the information.
— Define the printer in the Queue Service by highlighting the
printer name (for example, Gazette) and pressing Enter.
— Press the Insert key to select the Print Queue (for
example, Gazette) you want to bind with PSERVER (for
example, PGazette).
— Save the information.
•
When configuring NPS, answer the configuration questions as
follows:
— Remote Printer for Novell Netware -- <Y>
— Use Print Server for Novell Netware -- <Y>
— Name of Novell Print Server -- PGazette
— IPX Internal Network Number [000000##] (assigned by
network administrator)
— IPX number of Connected LAN [000000##] (assigned by
network administrator)
— Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
•
After installation, change from PSERVER to RPRINTER as
follows:
— Sign on to privilege as an administrator.
— Type Configure to specify the printer configuration.
— Select Option 3, enter <N> to the Review All Information
question, and type Novell to review Novell information.
— Remote Printer for Novell Netware -- <Y>
— Use Print Server for Novell Netware -- <N>
— Name of Novell Print Server -- PGazette
— IPX Internal Network Number [000000##] (assigned by
network administrator)
— IPX number of Connected LAN [000000##] (assigned by
network administrator)
DOCUPRINT NPS ON A NOVELL NETWORK
D-9