DOCUPRINT NPS ON A NOVELL NETWORK
D-8
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
•
After installation, change from PSERVER to RPRINTER as
follows:
— Sign on to privilege as an administrator.
— Type Configure to specify the printer configuration.
— Select Option 3, enter <N> to the Review All Information
question, and type Novell to review Novell information.
— Remote Printer for Novell Netware -- <N>
— Use Print Server for Novell Netware -- <N>
— Name of Novell Print Server -- PGazette
— IPX Internal Network Number [000000##] (assigned by
network administrator)
— IPX number of Connected LAN [000000##] (assigned by
network administrator)
— Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
— Save all of the options.
•
Type Start All.
•
Reboot the NPS.
•
Provide all of the required installation parameters identified in
the checklist provided in Chapter 2 of this guide to your service
representative.
In the following illustration, the queue, virtual printer, and specified
form are configured with the same name. The user sends a print job
that specifies a print queue named Gazette through the Ethernet or
Token Ring port to the Gazette queue that is served by the print
server. This job is assigned to the Gazette virtual printer on NPS.
Figure D-1. DocuPrint NPS configured as a PSERVER
Client
Workstation
File Server
Device
Ethernet
Print Queue
or
Token Ring
(serviced by print server)
Netware
DocuPrint
Virtual
Queue
Printer
Gazette
Gazette