Client Networking Software; Ethernet Lan - Xerox DocuPrint 92C Installation Planning Manual

PRODUCT OVERVIEW

Client networking software

Ethernet LAN

1-4 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS
•
PC 386 or 486, running MS-DOS, version 6.2, with one of the
following TCP/IP packages:
— PathWay Access 3.1, Wollongong Integrated Networking/
Transmission Control Protocol (WIN/TCP) for DOS, release
6.0
— File Transfer Program (FTP) software, PC-TCP/IP, release
3.0 or higher
— Sun Personal Computer–Network File Services (PC-NFS),
version 5.1
•
IBM RS/6000 running IBM AIX, version 4.1
•
HP/Apollo running HP-UX, version 10.01
•
DECStation 5000/200 running DEC Ultrix, version 4.3
•
Apple Macintosh, System 7.x or 8.x, using AppleTalk through
EtherTalk, phase 1 or 2
•
Any system that supports RFC-1179 lpr/lpd.
DocuPrint Model 92C NPS software may be compatible with
workstation models and software versions other than those listed
above.
Xerox client software, a third-party TCP/IP lpr networking software,
Novell, or Apple/Macintosh Printer Access Protocol (PAP)
networking software must be installed on your client workstations or
downloaded from the printer controller. This software provides an
interface with the printer controller, which allows you to submit print
jobs and check job status.
Note: The DocuPrint printing options available to a client user vary
according to the networking software loaded on the client
workstation.
For additional information on submitting jobs from a client
workstation, refer to the Xerox DocuPrint Network Printer Series
Guide to Submitting Jobs from the Client.
Users of networked client workstations may send print jobs to the
DocuPrint NPS printer over the Ethernet LAN using TCP/IP,
AppleTalk using EtherTalk Link Access Protocol (ELAP), or Novell
NetWare 3.1x as the network protocol.
Regardless of printing or transmission protocol, the Ethernet
connection to the printer controller must be compatible with the
Institute of Electrical and Electronics Engineers (IEEE) 802.3
standard.