Prepare The Propeller Set; Introduction - Hubsan X4 PRO Manual

Diagram
Insiallabon Position
Symbol explanation
PROPELLER
3.5 PREPARE THE PROPELLER SET
Hubsan X4 Pro equipped with 9 inch propellers—black and grey colors_ The propellers are easily
damaged, please purchase spare propellers from Hubsan_
3.5.1 INTRODUCTION
propeller A propeller B
s
a
cct
I) LOCK: In this direction, tighten the propeller onto the motor shaft
UNLOCK: In this direction, remove the propeller from the motor shaft
3.5.2 METHOD
Take out the 4pcs propellers, install them tightly onto the accordance motor shafts_
& • The propellers are designed to automatically tighten up, do not screw it too tight Do not
use screw glue_
• Make sure the black and grey propellers installed correctly, it cannot fly it the propellers
installed wrongly.
• Wear gloves when install the propellers to avoid scratches as the propellers are thin and sharp.
3.5.3 REMOVE PROPELLER
Hold the motor with the Propeller removal wrench,
rotate the propellers in unlock direction to remove
the propeller_