Hubsan X4 PRO Manual page 20

FPV TRANSMITTER
4.5 ANTENNA SIGNAL INSTRUCTION
The live video distanc is around 1000 meters. In order to gain the furthest communication
distance, make sure the transmitters antenna planted vertically and no obstacles between it
and the X4 Pro when in flight.
Keep the antenna vertical and let the signal surface(the logo side) towards the X4 Pro video
signal antenna.
A
Bend the transmitter antenna vertically, and keep the signal surface towards the X4
Pro video signal antenna; Ensure there is no obstacles between the two, or the X4
Pro will lose control.
4.6 FREQUENCY SELECTABLE 5.8GHZ
The transmitter will automatically find the best frequency to ensure the quality live video
transmission. in case there is any interference in your location, you can change the setting
from the range 5725MHz-5865MHz to get longer range and better video transmission.
Hold down the ENTER key for 1 second to enter setting status, move the arrow to 5.8G
FREQUENCE with up/down key, press the ENTER key again and select the frequency you
need with up/down key, hold down the EXIT key for 2 seconds to confirm and exit.
1 7 7
HUBSAN 11.5V
1 7
HUBSAN 11.5V '
I l
I
Set reverse + j ! Set reverse +
! Set sensitive + j ! Set sensitive +
I Plane type Aircraft ! Plane type Aircraft
I Expert mode Yes I Expert mode Yes
i i
I Stick mode 2 I Stick mode 2
I —Y- 5.8G frequence I —1- 5.80 frequence
i
j
!
5725 MHz
i i
20
432S1 5
Fkaran