Prepare The Parachute - Hubsan X4 PRO Manual

A • Pay attention to the direction of fix set, do not install wrccigly(the arrow on the fix set should
be direct up straight)
• Make sure the fix set reach the slot position before fix the screw, or it will cause unstable
and the X4 Pro will shake during flying.
[screw]
Rum buckle]
[slot]
PARACHUTE
3.4 PREPARE THE PARACHUTE
Refer to THE PARACHUTE INSTRUCTION MANUAL
Hubsan X4 Pro includes parachute set_ The power of the parachute is standalone, which means
even when the X4 Pro Li-Po battery power running out, the parachute can still work_ There is an
inner sensor inside the parachute, when the X4 Pro goes abnormal the sensor will detect it and
work immediately: commanding the parachute to open automatically, so that the X4 Pro can land
safely to avoid causing damages.
3.4.1 INSTALL THE PARACHUTE (EXCLUDED, NEED BUY FROM HUBSAN)
Step 1: install the fix set
Take out the parachute set from the box, remove the screw from the fix set, open the turn buckle;
Make sure the direction of the fix set is up straight as the arrows show_ Put the fix set onto the
undercarriage until it reach the slot position; Fix the screw to the fix set as the picture shows;
1
.2 ©201E FIL nan
(6
MR11,1