Hubsan X4 PRO Manual
With fpv transmitter
Hide thumbs
Also See for X4 PRO:
- User manual (31 pages) ,
- Instruction manual (28 pages) ,
- Manual (28 pages)
Related Manuals for Hubsan X4 PRO
Summary of Contents for Hubsan X4 PRO
- Page 1 ® Ages 14+ Read the instruction manual carefully ITEM NO.:H109S X4 PRO WITH FPV TRANSMITTER THE HUBSAN X4 PRO REAL TIME FPV...
-
Page 2: Important Safety Notes
Be extremely careful and responsible when use the X4 Pro. There are delicate electronic components, which can be damaged if you crash the X4 Pro or submerge it in water. Do not attempt to fly a damaged X4 Pro. Always inspect propellers for damage and proper tightness. Do not fly with damaged propellers! -
Page 3: Table Of Contents
1.1 calibration 1.1 Li-Po battery in the X4 Pro 1.2 Check the GPS 1.2 Charging 1.3 Power on/ off the X4 Pro Li-Po battery 2 POWER ON/OFF THE X4 PRO 1.4 Check The Li-po Battery Power 3 BASIC FLIGHT 2 SAFETY NOTES... -
Page 4: General Introduction
GENERAL INTRODUCTION Hubsan X4 Pro is a high-tech aerial video and photography quadcopter. It is equipped with a highly accurate and stable 3 axis gimbal, 1080P HD aerial photography camera, and advanced smart flight control system. The highly-integrated Android transmitter is capable of long distance camera control, video transmission, ground station auto flight, FPV flight, and social network sharing, etc. -
Page 5: Introduction
Hubsan) 2. INTRODUCTION The Hubsan X4 Pro system consists of the quadcopter, camera, gimbal, parachute, propeller guard, power system, flight control system, and radio transmission system. Transmitter equipment: dual data transmission, map and track display, waypoints set/auto-flight,... -
Page 6: Prepare The Li-Po Battery
Parachute 3.7 V 380mAh rechargeable Li-Po battery 1.1 LI-PO BATTERY IN THE X4 PRO The X4 Pro is equipped with a 11.1V, 3 cells, 7000mAh rechargeable Li-Po battery. Always charge the Li-Po battery with Hubsan provided charger. BATTERY SPECIFICATIONS Charging temperature: 0°C~40°C Discharging temperature: - 20°C~50°C... -
Page 7: Power On/ Off The X4 Pro Li-Po Battery
Power on: Put the battery into the battery compartment, connect the battery plug with correct polarity. When the X4 Pro is power on, the blue LEDs on X4 Pro will blink in a rotating pattern. Power off: Disconnect the battery connector plug to remove power from the X4 Pro. The LEDs will turn off. -
Page 8: Safety Notes
2 SAFETY NOTES 2.1 IMPORTANT NOTES This X4 Pro is not a toy. Any improper use of this product will result in serious injury. Be aware of your personal safety, the safety of others and your surrounding environment. We strongly recommend that beginners learn to fly with proper instruction from more experienced pilots before attempting to fly the X4 Pro for the first time. -
Page 9: Prepare The X4 Pro
[12] non-slip mat 3.1.1 FLIGHT CONTROL SYSTEM INTRODUCTION Hubsan X4 Pro is easy to operate and very stable, it supports moving forward/backward, left/right, ascending and descending, basic flight performance, and also supports lost control protection, power alarming and IOC functions. - Page 10 Use the Micro-USB cable to connect to the PC when the camera is powered on. This will allow you to copy the pictures/videos from the camera and charge the camera at the same time. Reading data and Charging the camera..© 2015 Hubsan...
- Page 11 2. Put the camera on the slot(camera facing outside), install the fix set, fix it with screws. 3. Plug the camera data wire into the USB interface, plug the other end into the X4 Pro external interface（see more details on 2.3.1）.
-
Page 12: Prepare The 3 Axis Stable Gimbal
Camera image transmission wire 3.3.2 GIMBAL INSPECTION AND ABNORMAL OPERATION an impact, or from a crash. Put the X4 Pro on a level surface before powering on and flight. Do not cause impact to, or immobilize the gimbal after it is powered on. -
Page 13: Prepare The Parachute
The Hubsan X4 Pro has an optional automatic parachute system. The parachute is self-powered which means even when the X4 Pro Li-Po battery power is low, the parachute will still work. There is a sensor inside the parachute system that detects when the X4 Pro goes into an abnormal attitude and then immediately commands the parachute to open. - Page 14 (Refer to the Parachute Instruction Manual for more information) 3.5 INSTALL 5.8 GHZ TRANSMITTER ANTENNA Method: 1) aim to the antenna connector on the X4 Pro, fasten it in clockwise direction; 2) make sure the antenna is straight and in line with the undercarriage.
-
Page 15: Prepare The Propeller Set
PROPELLER 3.6 PREPARE THE PROPELLER SET Hubsan X4 Pro equipped with 9 inch propellers--black and grey colors. The propellers are easily damaged. Please purchase spare propellers from Hubsan. 3.6.1 INTRODUCTION propeller propeller Diagram Installation Position LOCK: In this direction, tighten the propeller onto the motor shaft... -
Page 16: Preparation For The Smart Tx
PROPELLER 3.6.4 PREPARE THE PROPELLER GUARD For beginners, we recommend that using the Hubsan X4 Propeller Guard to enhance flying safety. The Propeller Guard is optional. Method：Fasten the screws to install the propeller guard as the below picture shows. 4 PREPARE THE 2.4GHZ & 5.8GHZ TRANSMITTER 4.1 INTRODUCTION AND FUNCTIONS...