Table of Contents
Advertisement
1804-19?_
9
Propeller Installation
Before installing propellers for the first time, please check that each
Propeller A is matched with motor A and each Propeller B is matched
with motor B. Then use the provided screws to secure each propeller.
Tighten the screws clockwise to install them. When the propellers
need to be replaced, unscrew the propellers by loosening the screws
counterclockwise and then removing the damaged propellers.
Getting To Know The HT016B Transmitter (Mode 2)
1. Mobile Device Frame
2-1. Throttle / Rudder Joystick
2-2. Elevator / Aileron Joystick
3. Return To Home (Aircraft
Returns To Takeoff Point)
4. Power (Long press)
5. Auto Takeoff / Land
6. Expert / Normal Mode
7. Power Status LEDs
8. Photo
9. Video
10. Gimbal Adjustment Wheel
11. Charging / Adapter Port
12. WIFI Antenna
13. Adapter Cable
12
11
When installing the mobile device, place the device in its dedicated
frame and avoid pressing the device's buttons with the frame.
This manual shows operations in Mode 2.
02
Advertisement
Table of Contents
