Prepare The 3 Axis Stable Gimbal - Hubsan X4 PRO Manual

/I\
• Gimbal engine abnormal, due to the unlevel surface had contact the gimbal, or the gimbal
crashed
Of
hit. Put the X4 Pro on a level and open surface before flight, do not collide the
gimbal after it power on
• Flying in fog or cloud will cause Dew Formation and lead to faulty gimbal_ The gimbal will
be normal after the it is dry.
©201E 1 - 1Lt.n
EergETqf
fr Gimbal signal wire
Camera image transmission wire
T Gimbal power wire
3.3.2 GIMBAL INSPECTION AND EXCEPTION HANDLING
PREPARE THE 1 AXIS STABLE GIMBAL
3.3 PREPARE THE 1 AXIS STABLE GIMBAL
Features of the gimbal
Control accuracy -±o_03°
Control range
Pitch angle:+90°— -90°
Stabilized design
Rotate automatically when the X4 Pro tilted to
ensure stable shooting
3.3.1 INSTALL THE 1 AXIS GIMBAL
Step 1: Take out the 1 axis gimbal from the box, aim at the bottom slot with Shock Resistance
Equipment slot, levelly slip into the bottom;
Step 2: Connect the gimbal signal plug with one of the external interface;
Step 3: Insert the image transmission plug into the left slot;
Step 4: Connect the power plug.
After the installation, power on the X4 Pro, the 1 axis gimbal will power on and adjust
automatically_ Slip the T2 rotary switch can easily control the gimbal rotation.