Printer requirements and specifications
Printer configurations available
Printer configuration diagrams
Printer with
inverter feeder/
stacker and
one feeder/stacker
6- 6
•
Proximity to electrical and network connectors
•
Security of the work area. You may need to place the system
in an area where you can restrict access to it. This may be
important if your personnel need to print confidential
documents or if you are concerned with unauthorized usage.
Dimensions and weights of the printer components are listed in
this section, along with diagrams, to help you visualize the sizes
and total space requirements.
NOTE: There must be a 78 inch / 198 cm vertical clearance
throughout the entire area. In addition, your printer must be
installed in a fixed location with a minimum clearance space of 36
inches / 91.4 cm around all sides of each piece of equipment for
access by service personnel. In addition, there must be 50 inches
/ 126.9 cm clearance space in front of the printer.
For information on clearance space and other space planning
considerations, refer to the "Space planning guidelines" section of
this chapter. Contact your service representative if you have
questions not specifically addressed in this guide.
The following configurations are available for the printer:
•
Printer + inverter feeder/stacker + 1 feeder/stacker
•
Printer + inverter feeder/stacker + 2 feeder/stackers
•
Printer + inverter feeder/stacker + 3 feeder/stackers.
Measurements and a top-view diagram for each of these
configurations is provided on the following pages.
The following diagrams show space requirements for three printer
configurations.
The dimensions of the printer with the inverter feeder/stacker and
feeder/stacker are as follows:
•
Width: 151.25 inches / 384.2 cm
•
Depth: 38.8 inches / 98.6 cm
•
Height: 59.6 inches / 151.3 cm
•
Weight: 2,588 pounds / 1174.9 kg
•
Total space requirement: 223.25 by 114 inches / 567 by 290.3
cm
Installation Planning Guide