Bypass Transport Option - Xerox DocuPrint 100 Installation Planning Manual

Bypass transport option

Function of the
bypass transport
Paper stocks
supported on
bypass transport
Bypass transport
printer
configurations
Installation Planning Guide
Figure 3-4
Printer with inverter feeder/stacker and
three feeder/stackers
The bypass transport option provides an interface between the
DocuPrint 100/115/135/155/180 EPS and your finishing
accessories. However, finishing devices require separate power
sources that are independent of the printing system.
The bypass transport option enables third party finishing devices
to interface directly with the printing system. The bypass transport
allows you to customize your printer for increased efficiency and
specialized applications involving finishing.
NOTE: A bypass transport must be installed for the printing
system to support a third party finishing device.
Connected to the last feeder/stacker module, the bypass transport
moves paper from the stacker to a third party finisher such as a
stitcher, booklet maker, tape binder, and so on. By making
selections on the user interface windows, you can program the
printer to send output to the bypass transport, which directs the
output to the finishing equipment.
The bypass transport accepts all paper stocks on which the printer
can print, and it accommodates simplex and duplex printing.
The following printer configurations may have the bypass
transport, illustrated below:
• Printer with inverter feeder/stacker and 1 feeder/stacker
• Printer with inverter feeder/stacker and 2 feeder/stackers
Printer components and options
3- 3