Space Planning Templates - Xerox DocuPrint 100 Installation Planning Manual

Printer requirements and specifications
Device
Printer with W=216 in / 730.8 cm
inverter feeder/ H=59.6 in / 151.3 cm
stacker and D=38.8 in / 98.6 cm
three feeder/
stackers Total space required
(+ access):
288 in W by 114 in D /
730.8 cm W by 290.3
cm D
Bypass W=20.4 in / 51.9 cm
transport H=56.1 in / 142.5 cm
D=28.3 in / 71.9 cm

Space planning templates

6- 2 6
Dimensions (width,
depth, height)
The dimensions and space requirements for your printer
components are provided earlier in this chapter. The space
planning templates are designed to simplify the space planning
process by helping you to create a floor plan for your base
components, particularly if you have shared clearance space.
The easiest way to use the space planning templates is to move
the templates around on the grid located at the end of this section
and determine the optimum placement for your printer
components. Make sure to consider other pieces of equipment,
Total Weight Heat dissipation
3,630 lbs / DP 135:
1,648.9 kg Operating:
28,140 BTU per hr
Standby:
4,454 BTU per hr
Energy Saver:
2,700 BTU per hr
DP 155 and 180:
Operating:
32,770 BTU per hr
Standby:
4,454 BTU per hr
Energy Saver:
2,700 BTU per hr
176 lbs / ---
80 kg
Power
requirements
60 Hz:
DP 135:
120/240 VAC
or
120/208 VAC;
50 amp
service;
NEMA 14-50R,
KVA
8.1(operating)
DP 155 and
180:
120/208 VAC
(182 V to 220
V),
KVA
8.1(operating)
Cord 1: 50
amp,
NEMA 14-50R
Cord 2: 30
amp,
NEMA 14-30R
50 Hz:
Consult your
local service
representative
---
Installation Planning Guide