Printer Requirements And Specifications; Power Requirements - Xerox DocuPrint 100 Installation Planning Manual

Power requirements

Table 6-1 Printer electrical requirements
Component
Printer 60 Hz 120/240 VAC or 120/
(U.S. and 208 VAC (Cord 1)
Canada)
120/240 VAC or 120/
208 VAC (Cord 2 for DP
155 and DP180 only)
Printer 50 Hz - 380, 400, 415 VAC
WYE (Star) (3 phase, 5 wire)
Installation Planning Guide
6 Printer requirements and
specifications
This chapter provides power and space requirements for the
DocuPrint 100/115/135/155/180 EPS printer. It also provides
printer environmental specifications.
For information about controller power and space requirements,
refer to the "Controller specifications and requirements" chapter of
this guide.
Your printer has important power requirements that must be
accommodated. These requirements are summarized in the table
below.
For further details on power requirements, refer to the voltage
charts and wiring diagrams that follow.
For details on controller power requirements, refer to the
"Controller specifications and requirements" chapter of this guide.
Voltage Amp. service
50 amp (Cord 1)
30 amp (Cord 2 for
DP 155 and DP180
only)
30 amp
Agency certification: UL 478 and 1950, IEC 950, CE Mark,
CSA 22.2 #220-1986, FCC (Class A), and VDE 0871 (Class A).
KVA rating
(operating mode) Requirements
Operating: 7.3 14-50R (Cord 1)
+ .75 per middle
14-30R (Cord 2
module stacker
for DP 155 and
DP180 only)
Consult local
service
representative
Additional
6-1