Xerox DocuPrint 100 Installation Planning Manual page 75

Installation Planning Guide
such as cabinets, tables, and optional equipment when planning
your space. Your customer support representative can help you
plan space for additional components.
The templates are to scale with the grid; each square is equal to
12 by 12 inches / 30.5 by 30.5 cm. The curved dotted lines in the
corners of the space perimeters indicate the corners that may be
rounded off while still maintaining the required clearance space.
There are a number of factors to keep in mind when planning your
site, including the following:
• Clearance space requirements
• Cable length
Refer to these sections in this manual when considering the
various factors involved in planning the appropriate location for
your printing system.
When determining your space requirements, remember to
consider all of the components you plan to have installed. If you
have a bypass transport or input enablement device option on
your printing system, you should contact the sales representatives
for the company from which you purchased your finishers and
feeders, as well as your Xerox representative, to ensure that all of
your space requirements are met.
Printer requirements and specifications
6- 27