Decurler Paper Type A - D Settings - Xerox DocuColor 7000AP Supplementary Manual

Decurler Paper Type A - D Settings

Do c u Co lo r 70 0 0A P /8 0 00 A P D ec u r l e r A d ju s t me n t
If paper curl is a problem, using one of the preset Decurler Paper
Type A-D Profile Settings usually eliminates the problem.
However, due to the broad range of paper variables, image
coverage, and environmental factors, these default settings may
not result in satisfactory performance.
KEY POINT: While paper curl is caused by many variables, it is
important to understand that the preset and custom Decurler
profile settings use lookup tables for curl control that are based on
the job's percentage of toner area coverage and the printer's
humidity values, only.
Visit the
www.xerox.com
Recommended Materials List (RML) for your digital press:
• To determine if Xerox has tested your paper type and weight
• View the recommended Decurler Paper Type A - D settings for
particular paper types.
The following table shows examples of the Decurler A - D Profile
settings for particular stocks, which were taken directly from the
Recommended Materials List for the DocuColor 8000/7000:
Decurler A - D Profile settings examples
Paper Type
Xerox Digital Color Supreme Gloss 8pt. Cover C1S
Xerox Color Xpressions +, 32 LB
Xerox Digital Color Parchment White, 24 LB.
Xerox Digital Color Elite Gloss 100# Text
NOTE: The settings recommended in the "Recommended
Materials List for DocuColor 8000/7000" were developed from
testing a wide range of paper samples, percentage of toner area
coverage, and environments. The outcome of this testing is the
preset parameters shown in the list, and these parameters refer to
how particular papers interact with the digital press decurling
system.
If the System Default setting is not correcting curl, then you can
use one of the Decurler Paper Type A - D settings,
Paper Type A - D procedure" on page 4.
• If the System Default is not correcting curl, select Decurler
Paper Type A.
• If Decurler Paper Type A is not correcting curl, select Decurler
Paper Type B.
• If Decurler Paper Type B is not correcting curl, select Decurler
Paper Type C.
D ec u r l er A dj u s tm en t
web site and refer to the latest
For example:
Decurler
Setting
A
B
A
A
See "Decurler
3