Xerox DocuColor 7000AP Supplementary Manual page 10

De c u r le r Ad j u s tm en t
6
4. The Decurler Setup screen opens.
a. From the Paper Tray menu, select the tray that contains
the paper you are using on the job. The default selection is
Tray 1.
NOTE:
If you have an optional SFM attached, Trays 3 and 4 also appear
on this screen.
b. Select the job's stock coating: Uncoated or Coated.
c. Make a selection from the Paper Weight range menu.
d. The default Paper Type is automatically applied by the
printer for the Paper Tray, Coating and Paper Weight
values you entered. Select an alternate Paper Type from
Paper Type A through Paper Type D to change the amount
of decurling applied. As an example, if the system
automatically selects Type B, select Type C.
NOTE: The Type E settings are custom entered values that
are explained later in this section. While the Type E settings
can be selected, they need to be programmed prior to
See "Decurler E Table Settings" on page 8.
selection.
e. Touch the Close button to save your selections and return
to the Machine Defaults 2 screen.
NOTE: Touch the Reset button on the Decurler Setup screen to
return to the settings established when you first accessed the
screen. As an example, if the system automatically selected Type
B and you changed it to Type C, the system will return the setting
to Type B.
Do c uC ol o r 70 0 0A P / 80 00 A P De c ur l e r A dj u s tm en t