Xerox DocuColor 7000AP Supplementary Manual page 37

Do c u Co lo r 70 0 0A P /8 0 00 A P D ec u r l e r A d ju s t me n t
5. Within the Decurler E Table Settings screen, select the
following options for the job:
a. The job's Paper Type. For this exercise we are using
Single Paper Weight.
b. Select the E Table that you will use to enter Decurler
values. You can edit an E Table or create a new one. For
this exercise we will create a new E Table using Type E3.
c. Select a Decurler Type:
– Simplex: Straight: Select this setting if your output is
1-sided, face-up. We will use this setting for this
exercise.
– Simplex: In Reverse: Select this setting if your output
is 1-sided, face-down
– Duplex: Side 1 to Side 2: Select this setting if your
output is 2-Sided, face-down (1-N)
– Duplex: Side 2 to Side 1: Select this setting if your
output is 2-Sided, face-up (N-1)
– Duplex Decurler: Select this setting if your 2-Sided
jobs frequently jam in Areas 5, 6, 7a, and 7b of the
digital press, or if curl is apparent on your 2-Sided job.
d. Select the E Table Settings button to enter Decurler E
Table Settings values.
D ec u r l er A dj u s tm en t
33