Tray Paper Settings; Tools; Troubleshooting - Xerox Phaser 4622 User Manual

Getting Started

Tray Paper Settings

Use the Tray Paper Settings to set the size, type and color settings for each tray.
Option
Tray 1 (Bypass) Paper
Tray 2 Paper
Tray 3 - 6 Paper

Tools

The settings on the machine can be setup using the Tools option on the machine, or by using
CentreWare Internet Services. For further information about using the Tools option, refer to
page 77. For information about the settings available in CentreWare Internet Services, refer to the
System Administrator

Troubleshooting

The Troubleshooting option provides information and reports which can help to identify or solve
problems.
Option
Error Messages
Last 40 Error Messages
Call for Assistance
Print All Above Reports
Test Prints
Hexadecimal Mode
22 Xerox Phaser 4622
User Guide
Select Use Current Setup if loading the same paper size, type and color
as previously loaded. Select Change Setup and adjust the settings if
loading a different paper size, type or color.
Guide.
Prints a list of active error messages.
Prints a list of the last 40 fault messages and when they occurred.
Prints a report containing information about the machine and the
current faults. Status information for each of the Customer Replaceable
Units and machine configuration information is also included.
This option enables you to print all the troubleshooting reports.
This feature enables you to print test prints that will help you and the
Xerox Support Center diagnose image quality problems. Each test
pattern checks parts of the printing process.
Prints a page showing each character received by the printer and it's
hexadecimal code, instead of interpreting the characters as PCL or PS.
Description
Description
Setups on