Xerox DocuColor 7000AP Supplementary Manual page 46

De c u r le r Ad j u s tm en t
42
6. In the Decurler E Table Settings Type E window:
a. Enter the following values in the fields by pressing the
arrow buttons:
– Since your job does not require the Downward
Decurler, enter 0% in each of the Lower fields.
– In the Upper 2 mm (Light curl) field, enter 10%. As a
result, pages with toner area coverage from 0% to
10%, which includes the Bolivar Ltd. Page, will be sent
to through this Decurler.
– In the Upper 6 mm (Medium curl) field, enter 20%.
Since none of your job pages have toner area
coverage from 11% to 20%, this Decurler will not be
used.
– In the Upward 10 mm (Heavy curl) field, enter 100%.
This means that all pages with toner area coverage of
21% or greater, which includes the Carousel Horses,
will be sent to the 10 mm downward pressure Decurler.
NOTE: Remember, all fields have to be considered (Lower and
Upper) when entering Decurler values.
The following screen shows how the values would be entered:
b. To save your Decurler E Table Setting, press Close. The
Decurler E Table Setting Type E window closes and the
Decurler E Table Setting window opens.
Do c uC ol o r 70 0 0A P / 80 00 A P De c ur l e r A dj u s tm en t