Xerox DocuColor 7000AP Supplementary Manual page 38

Decurler adjustment

Hide thumbs Also See for DocuColor 7000AP:

Table of Contents

De c u r le r Ad j u s tm en t

6. In the Decurler E Table Settings Type E window:

a. Enter the following values in the fields by pressing the

arrow buttons:

–

Since your job does not require the Downward

Decurler, enter 0% in each of the Lower fields.

–

In the 2 mm Upper field enter 15%. As a result, any

pages with toner area coverage of 0% to 15% will be

sent through this Decurler. Since this job contains toner

area coverage between 11% and 12%, this is the

Decurler that will be used.

–

In the 6 mm Upper field, enter 100%. Since your job

does not contain any pages with toner area coverage

between 16% and 100%, this Decurler will not be used

on this job.

–

In the 10 mm Upward field, enter 100%. As a result,

this Decurler will not be used on this job.

NOTE: Remember, all fields have to be considered (Lower and

Upper) when entering Decurler values.

The following screen shows how the values would be entered:

b. To save your Decurler E Table Setting, press Close. The

Decurler E Table Setting Type E window closes and the

Decurler E Table Setting window opens.

Do c uC ol o r 70 0 0A P / 80 00 A P De c ur l e r A dj u s tm en t

Table of Contents

Docucolor 8000ap