Xerox DocuColor 7000AP Supplementary Manual page 29

Do c u Co lo r 70 0 0A P /8 0 00 A P D ec u r l e r A d ju s t me n t
5. Within the Decurler E Table Settings screen:
a. Select the job's Paper Type. For this example we are
using Single Paper Weight.
b. Select the E Table that you will use to enter Decurler
values. For this exercise we will create a new E Table
using Type E2.
c. Select a Decurler Type:
– Simplex: Straight: Select this setting if your output is
1-sided, face-up
– Simplex: In Reverse: Select this setting if your output
is 1-sided, face-down. Since this job example is face
down, select this setting
– Duplex: Side 1 to Side 2: Select this setting if your
output is 2-Sided, face-down (1-N)
– Duplex: Side 2 to Side 1: Select this setting if your
output is 2-Sided, face-up (N-1)
– Duplex Decurler: Select this setting if your 2-Sided
jobs frequently jam in Areas 5, 6, 7a, and 7b of the
digital press, or if curl is apparent on your 2-Sided job.
d. Select the E Table Settings button.
D ec u r l er A dj u s tm en t
25