Entering Values In The Decurler E Table Fields - Xerox DocuColor 7000AP Supplementary Manual

Entering values in the Decurler E Table fields

Do c u Co lo r 70 0 0A P /8 0 00 A P D ec u r l e r A d ju s t me n t
KEY POINT: It is important to understand that when entering
percentage of toner area coverage values within the Decurler E
Table Settings Type E window that the maximum allowed entry is
100%.
When determining what values to enter, do not total all CMYK
percentage of toner area coverage, but instead determine the
largest CMYK percentage of toner area coverage value. Take a
look at the following examples for further explanation:
• If your job contains percentage of toner area coverage of
100% cyan, 100% magenta, 100% yellow, and 100% black,
the maximum percentage of toner area coverage value is
100%. If your job contains 100% cyan, 20% magenta, 20%
yellow, and 20% black, the maximum value is still 100%.
• If your job contains percentage of toner area coverage of 50%
cyan, 50% magenta, 50% yellow, and 50% black, the
maximum percentage of toner area coverage value is 50%. If
your job contains 50% cyan, 10% magenta, 10% yellow, and
10% black, the maximum value is still 50%.
• Consider the Carousel Horses percentage of toner area
coverage image shown below. When entering percentage of
toner area coverage values to control curl, you will use the
black 30.5% value, not the combined total of all CMYK values.
Percentage of Toner Area Coverage
Percentage of Toner Area
Black
Magenta
Cyan
Yellow
D ec u r l er A dj u s tm en t
Carousel Horses
Coverage per Color
30.5%
28.1%
23.8%
29.5%
11