Printing With A Custom Control Bar - EFI DocuColor 5000 User Manual

Color server - graphic arts package
Hide thumbs Also See for DocuColor 5000:
Table of Contents

Advertisement

C
S
F
OLOR
ETUP
Restoring the factory default values
The Control Bar Definition dialog box allows you to delete all user-defined Control Bars and
restore the default Control Bar to its original state by clicking Factory Defaults.

Printing with a custom Control Bar

The procedure to print a job with a custom Control Bar is basically the same as to print with
the default Control Bar (see
Control Bar.
T
O PRINT A JOB WITH A CUSTOM
1 Choose Print from your application.
2 Select Fiery EXP8000/50 as your printer and click Properties.
The Properties dialog box appears with the Fiery Printing tab selected.
3 Click the Job Info icon.
4 Select On from the Control Bar list.
Selecting On from the printer driver affects the current job only. If you selected Print
N
:
OTE
Control Bar in the Control Bar pane, selecting Printer's Default has the same effect as On.
Selecting Print Control Bar in the Control Bar pane sets the default value to On for all jobs.
5 Click OK.
6 Click Print.
The job is printed with the Control Bar specified in the Control Bar Definition dialog box.
EATURES
page
29). Use the following procedure to print with a custom
C
B
ONTROL
AR
36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 7000Docucolor 8000Fiery exp8000/50

Table of Contents