Scenario 3: Check The Quality Of The Output Profile - EFI DocuColor 5000 User Manual

P
OSTFLIGHT
Scenario 3: Check the quality of the output profile
Use the following procedure to check the quality of the output profile of the print device.
T
O CHECK THE QUALITY OF OUTPUT PROFILE AND PRINT WITH THE OPTIMUM OUTPUT PROFILE
1 Click the Job Info icon.
2 Select Test Page Only from the Postflight list.
For information about the Postflight Test Page, see
3 Click OK.
4 Click Print.
Postflight Test Page is printed to the Fiery EXP8000/50.
5 Review the quality of the color on the Postflight Test Page.
Make sure this page was printed with the same media and print option settings as
N :
OTE
the job.
6 Review the instructions on the Postflight Test Page.
7 Edit the color of the output profile, or create a profile, if needed.
It may be necessary to customize the output profile or create one to get optimal results on the
media the job is using.
8 Select Off from the Postflight list.
9 Click OK.
10 Click Print.
The job is printed to the Fiery EXP8000/50 with the edited or newly created output profile.
page 74.
82