Scenario 2: Check The Calibration Status - EFI DocuColor 5000 User Manual

P
OSTFLIGHT

Scenario 2: Check the calibration status

Use the following procedure to check the calibration status prior to printing a job.
T
O CHECK THE CALIBRATION STATUS AND PRINT WITH THE OPTIMUM CALIBRATION CONDITION
1 If you have not printed the Detailed Report, select Detailed Report Only from the Postflight
menu.
If you have printed the Detailed Report and are familiar with the content, select Concise
Report Only.
For information about Postflight reports, see
2 Click OK.
3 Click Print.
The Detailed Report or Concise Report page is printed.
4 Review the information in the ColorWise global settings page.
5 Perform calibration, if needed.
If service has been performed on the print device since the last calibration, or calibration has
not been performed, perform calibration using the Calibration Set specified in the Postflight
report.
For more information about Calibration Set, see
6 Select Off from the Postflight list.
7 Click OK.
8 Click Print.
9 The job is printed to the newly calibrated Fiery EXP8000/50.
page 75.
Color Printing.
81