Using The Dcs 2.0 To Postscript Filter - EFI DocuColor 5000 User Manual

H F F
OT OLDERS ILTERS
Using the DCS 2.0 to PostScript filter
The DCS 2.0 (Desktop Color Separation) to PostScript filter accepts DCS 2.0 files and
outputs a single preseparated PostScript file.
This filter accepts the following DCS 2.0 files:
• Single/Multiple DCS files, no composite
• Single/Multiple DCS files with grayscale composite
• Single/Multiple DCS files with color composite
The DCS 2.0 filter has no configurable options; however, you must follow these guidelines to
convert your DCS 2.0 job:
• Enable the Combine Separations print option. For more information about setting print
options, see Print Options.
• Make sure that you have necessary multiple files for a DCS 2.0 job and in one folder.
If a file is missing, the filter fails to process and an error message appears.
• If multiple files for a DCS 2.0 job are stored in a folder, you may place the entire folder in
the Hot Folder.
• If you download a DCS 2.0 job using the Download command, all files may be inside a
folder. You must download the entire folder.
If you configure the DCS 2.0 to PostScript filter, the Imposition feature is not
N :
OTE
available.
64