C
S
F
OLOR
ETUP
These selections are arbitrary, independent of the source job and the printing order of the
copier. With this selection, the first sheet includes the black plate only, because it is often the
most important plate when looking at separations. The other colors are added in a
"progressive" order.
When you return to the Progressives tab, the set of selections you last made is displayed.
The colors included do not have to represent the actual sequence applied by the copier, which
provides more flexibility for analyzing the image composition.
Specifying color channels
Use the following procedure to access the Progressives pane and specify color channels.
T
P
O ACCESS THE
ROGRESSIVES PANE AND SPECIFY COLOR CHANNELS
1 Start ColorWise Pro Tools and connect to the
2 Click Color Setup.
3 Click the Progressives tab.
4 Specify the color channels in the Progressives pane.
For information about the options in the Progressives pane, see
5 Click Apply.
The specified color channels are applied.
Printing with custom Progressives
After specifying the color channels, print a job with custom Progressives by setting the
Progressives print option to On from the printer driver.
Alternatively, you can send a job with default Progressives setting and change the print
N
:
OTE
option setting using Command WorkStation.
Use the same procedure on
the printer driver. The printed job reflects the Progressives settings you defined in the
Progressives pane.
EATURES
page 43
to print a job with the custom Progressives feature from
F
EXP8000/50
.
IERY
page
44.
45