Defining Custom Values For Auto Trapping; Printing With The Configurable Auto Trapping Feature - EFI DocuColor 5000 User Manual

C S F
OLOR ETUP
Defining custom values for Auto Trapping
Use the following procedure to select the Auto Trapping settings and define custom values.
T A T
O DEFINE UTO RAPPING VALUES
1 Start ColorWise Pro Tools and connect to the Fiery EXP8000/50.
2 Click Color Setup.
3 Click the Auto Trapping tab.
4 Define a value for each option in the Auto Trapping pane.
For information about the options in the Auto Trapping pane, see
5 Click Apply.
The defined Auto Trapping values are applied.
Printing with the configurable Auto Trapping feature
After you define the Auto Trapping values, print a job with the Auto Trapping feature by
setting the Auto Trapping print option to On from the printer driver. You can change the
setting for this print option using Command WorkStation.
If the Auto Trapping values are changed, reRIPping is required to print a job with the
N :
OTE
new values.
Use the procedure on
printer driver.
Selecting On from the printer driver affects the current job only. Selecting Apply Auto
N :
OTE
Trapping in the Auto Trapping pane in Color Setup sets the default value for all jobs, and
allows you to select Printer's default from the printer driver.
The job is printed with the Auto Trapping values defined in the Auto Trapping pane.
EATURES
page 30 to print a job with custom Auto Trapping values from the
41
page 38.