Scenario 4: Diagnose A Color Problem Of A Specific Object - EFI DocuColor 5000 User Manual

P
OSTFLIGHT
Scenario 4: Diagnose a color problem of a specific object
Use the following procedure to diagnose a color problem.
T
O DIAGNOSE A COLOR PROBLEM OF A SPECIFIC OBJECT AND PRINT WITH THE EDITED COLOR SETTINGS
1 Click the Job Info icon.
2 Select Color-Coded Page Only from the Postflight list.
For information about Postflight color-coded pages, see
3 Click OK.
4 Click Print.
Postflight color-coded pages are printed to the Fiery EXP8000/50.
N : Alternatively, you can send the Postflight color-coded pages to the Hold queue of the
OTE
Fiery EXP8000/50 and preview them using ImageViewer. To preview the pages using
ImageViewer, make sure that your monitor is set up according to the manufacturer's
recommendations and that the correct monitor profile is specified for your monitor. For
information about monitor profiles, see
5 Review the Postflight color-coded pages.
6 Make changes to the color settings, if needed.
For information about the ColorWise print options for various color spaces, see
Printing.
Use the Color-Coded Pages Only setting to send a job to another print device that has
N :
OTE
a specific color-space requirement. For example, a document targeted to a CMYK-only press
must have only Cyan-colored objects.
7 Select Off from the Postflight list.
8 Click OK.
9 Click Print.
The job is printed to the Fiery EXP8000/50 with the edited color settings.
page 74.
page 13.
83
Color