Configurable Auto Trapping; Configurable Auto Trapping Workflow; Printing With Default Auto Trapping - EFI DocuColor 5000 User Manual

C
OLOR
Configurable Auto Trapping
Trapping is a technique where some objects are printed slightly larger or smaller than you have
specified in an application, in order to prevent white edges around the objects. These white
edges, or "hollows," can be caused by factors such as misregistration, the physical properties of
the toners, and the stiffness of the media.
The configurable Auto Trapping feature provides you with advanced trapping settings and
gives you full control over their values. The Fiery EXP8000/50 is shipped with values that are
optimized for the print device using regular paper, but if these values do not provide the
results necessary for the media that you use, modify the values to meet your requirements.
Configurable Auto Trapping workflow
The fixed values are set as default for Auto Trapping. The
fixed values when you set Auto Trapping to On, with generally good results. However, to
customize the values for Auto Trapping, define the values in the Auto Trapping pane in Color
Setup. After you define the values, print a job with Auto Trapping set to On from the printer
driver.

Printing with default Auto Trapping

You can print a job with default Auto Trapping by setting the Auto Trapping print option to
On from the printer driver.
T
O PRINT A JOB WITH DEFAULT
1 Choose Print from your application.
2 Select Fiery EXP8000/50 as your printer and click Properties.
The Properties dialog box appears with the Fiery Printing tab selected.
3 Click the ColorWise icon.
S F
ETUP EATURES
A T
UTO RAPPING
applies these
Fiery EXP8000/50
37