Paper Simulation White Point Editing; Paper Simulation White Point Dialog Box - EFI DocuColor 5000 User Manual

P S W P E 16
APER IMULATION HITE OINT DITING

Paper Simulation White Point editing

Your job may print satisfactorily with the fixed Paper Simulation setting. However, you can
customize the Paper Simulation setting by editing the Paper Simulation White Point values
with ColorWise Pro Tools Color Editor.

Paper Simulation White Point dialog box

The Paper Simulation White Point dialog box displays Hue, Brightness, and Saturation
sliders. A graphic under each slider displays the current setting. To adjust the settings, drag the
slider left or right, or type a value in the editable text field to the right of the slider bar.
N : The sliders do not show absolute values. The slider position and associated values are
OTE
relative to the paper white definition in effect when you open the dialog box.
Hue
This setting allows you to change the hue of the Paper Simulation White Point. Specify a
value between 0.0 and +359.9. If you specify a value greater than 359.9, it automatically
changes to 359.9. If you specify a value less than 0.0, it automatically changes to 0.0.
Brightness
This setting allows you to change the brightness of the Paper Simulation White Point.
Specify a value between 0.0 and 100.0 (inclusive). If you specify a value greater than 100.0,
it automatically changes to 100.0. If you specify a value less than 0.0, it automatically changes
to 0.0.
Saturation
This setting allows you to change the saturation of the Paper Simulation White Point.
Specify a value between 0.0 and 100.0 (inclusive). If you specify a value greater than 100.0,
it automatically changes to 100.0. If you specify a value less than 0.0, it automatically changes
to 0.0.