Editing Paper Simulation White Point - EFI DocuColor 5000 User Manual

P S
APER IMULATION
Preview
This area in the lower-left corner of the dialog box displays a preview of the paper simulation
color, surrounded by a white border for contrast. The preview is based on the monitor profile
you specified next to Current Monitor Profile.
To preview the color correctly with your monitor, select the Monitor Compensation option,
and then select the correct monitor profile for your monitor. For more information, see
page 19.
To display the colors correctly with your monitor, you must set the monitor and
N :
OTE
monitor settings correctly. For more information, see

Editing Paper Simulation White Point

To edit a custom profile, do the following:
• Select a CMYK Simulation Profile.
• Select Full (Output GCR) for a simulation method.
• Link the simulation profile to an output profile.
Use the following procedure to access the Paper Simulation White Point dialog box to edit
the values.
If Paper Simulation is set to On, and you have defined a substitute color as
N :
OTE
C=0, M=0, Y=0, K=0, the values defined in Substitute Colors override those for Paper
Simulation. For information about Substitute Colors, see
T P S
O ACCESS THE APER IMULATION
1 Start ColorWise Pro Tools and connect to the Fiery EXP8000/50.
Start ColorWise Pro Tools from a stand-alone application or Command WorkStation, at your
computer or at the monitor connected to the Fiery EXP8000/50.
2 Click Color Editor.
W P E
HITE OINT DITING
W P
HITE OINT DIALOG BOX
page 13.
Color Printing.
17