Spot -O N With Two -Color Print Mapping; Using Two-Color Print Mapping - EFI DocuColor 5000 User Manual

S -O
POT N WITH

Using Two-Color Print Mapping

S -O T -C
POT N WITH WO
T -C P
WO OLOR
In addition to managing "named" colors, Spot-On allows you to assign spot colors and
process colors to the generic colors that are used in a job. The Two-Color Print Mapping
feature is designed for print shop operators to do the proofing for a two-color press. You can
print a two-color job to a two-color device by mapping the colors in a job to the colors that
are already created on the device.
For information about managing named colors with Spot-On, see
N : The RGB colors in a document are first converted to CMYK colors and then the
OTE
Two-Color Print Mapping is applied.
The following limitations apply when you use the Two-Color Print Mapping feature:
• The settings for Two-Color Print Mapping are ignored when the Composite Overprint
and Combine Separation features are enabled.
• Postflight does not report on Two-Color Print Mapping, because Postflight reports the
source state of a document. The color space that the digital press receives before any
conversions is reported in Postflight.
• You cannot select the Two-Color Print Mapping and Substitute Color options at the same
time. Also, you cannot select a substitute color to be used in the Two-Color Print Mapping
feature.
In the Two-Color Print Mapping feature, the colors that are used in a job are mapped with the
colors to print. From the Spot-On main window, open the Define Two-Color Print Map
dialog box and then reassign the document colors to the named or custom colors to print
with. When the feature is turned on from the printer driver, Fiery EXP8000/50 replaces the
document colors with the colors you defined in the Define Two-Color Print Map dialog box.
You can also override the print option setting using Command WorkStation.
P M
OLOR RINT APPING
M
RINT APPING
22
Color Printing.