Image Viewer; Accessing Imageviewer - EFI DocuColor 5000 User Manual

I V
MAGE IEWER

Accessing ImageViewer

T
O START
I V
MAGE IEWER
ImageViewer allows you to soft proof and adjust colors in a job before it is printed. You can
use the preview in ImageViewer to verify job placement, orientation, and content, as well as
general color accuracy. If the job contains halftone screened settings, the preview shows a
composite view of all separations at the dot level. You can select to display the plate data for
each process color independently or in combination with the other colors, allowing inspection
of individual plate data or a combination of any range of plates.
Start ImageViewer from either the Actions menu or Preview window of Command
WorkStation.
I V
MAGE IEWER FROM THE
1 In the Active Jobs window of Command WorkStation, select the job that you want to preview.
ImageViewer recognizes only jobs that show processed/held (dark yellow) status.
N :
OTE
Processed/held jobs are also indicated by the raster job icon (page icon ringed with a halo).
2 If needed, choose Process and Hold from the Actions menu to move the job to processed/held
status.
3 To start ImageViewer, do one of the following:
• Choose Launch EFI ImageViewer from the Actions menu.
• Right-click the selected job and choose Launch EFI ImageViewer from the menu that
appears.
The ImageViewer main window appears.
A
CTIONS MENU
53