Updating The Status On Windows - EFI DocuColor 5000 User Manual

I
NTRODUCTION

Updating the status on Windows

Use the following procedure to update the status of Graphic Arts Package on a Windows
computer.
N : Before updating the status on a Windows computer, you must install the printer driver.
OTE
For information about installing the printer driver, see
T
O UPDATE THE STATUS ON A
1 Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start and choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and Faxes.
2 Right-click the Fiery EXP8000/50 and choose Properties.
The Properties dialog box appears.
3 Click the Installable Options tab.
4 Select the Two-Way Communication option.
5 Type the Fiery EXP50 IP address or DNS name and click Update.
The Graphic Arts Package option that is enabled at the Fiery EXP50 is displayed in the
Installed Options area.
If you use the Point and Print method to install the printer driver and printer
N :
OTE
description file, you must enable Two-Way Communication on the Fiery Advanced
Controller Interface monitor at the Fiery EXP8000/50 for each connection (print, hold, or
direct) before you install them on your computer. For more information about Point and
Print, see Printing from
W
INDOWS COMPUTER
Windows.
Printing from Windows.
11