Data Transfer - Xerox 8142 Reference Manual

Wide format color solution

Hide thumbs Also See for 8142:

Table of Contents

Introduction

Portions of lines are missing

Prime, clean, calibrate, or replace cartridges.

Clean service station; clean cartridge again; repeat prime.

Clean carriage flex cable and cartridge electrical contacts; repeat prime. Do not use alcohol, acetone, or other

cleansers. Use a cotton swab moistened in distilled water. Use tap water if distilled water is not available.

Poor vertical or horizontal line quality

Perform color calibration. (See the Quick Reference Guide.)

Data Transfer

Printer doesn't generate a print

Be sure your printer is connected to the port to which you are sending the file.

If you are printing over a network, you will need to determine whether the problem is in the network. Try con-

necting the printer directly to your computer and send the file again. Be sure that network settings are correct as

described in the Network Setup Guide online help.

Problems printing over a network

Be sure that the printer is configured to run on the network. Pick a driver in your software that is also listed under

Emulation on the printer.

No output when printing from Unix

If you encounter "no output" problems when printing from Unix, try the following:

Reference Guide 8142/8160

Printer Options

Menu Tree

Technical Info

Error Messages

Troubleshooting C

Troubleshooting C-13

Troubleshooting

Table of Contents

8160