Table of Contents
Advertisement
Introduction
Introduction
Nozzle may have failed. Replace cartridge.
Check to see whether spray from printing has contaminated the flex contact. Remove the cartridge and wipe the
carriage flex and cartridge flex with a cotton swab moistened with water.
Run the jet status plot as described in the Quick Start Guide. If sections of the print are missing, add the affected
jets to the compensation list. Replace the cartridge if necessary.
Ink spills on the flex cable
Flex cable refers to the copper contacts on the carriage where the cartridge seats. Clean the flex cable gently
with a cotton swab moistened with water. Do not use acetone or any other harsh cleaner as this may cause
damage to the flex cable.
Dryer 'Disabled' Condition (under Sensor Status)
Check voltage switch position (either 115V or 230V depending on region). For a dryer set to 115V and operated
at 230V line input, the circuitry in the dryer will sense over temperature due to the excessive current (prior to the
circuit breaker tripping). This will cause the dryer to go into shutdown mode, turning the heaters off and cycling
the fans. Turn power off and on again.
Caution: When the printer's power cord is plugged in, AC power is routed to the dryer regardless of the printer
power switch position. Always remove power from the printer and dryer (turn off printer power switch and
unplug printer's power cord) whenever switching voltage switch positions or when manipulating the circuit
breaker. To reinitialize the printer, apply power to the printer and dryer (plug in printer power cord and turn on
printer power switch).
Printer settings are lost when printer is turned off or rebooted
Be sure to save your printer settings to a user number. (See "Saving User Settings" in Chapter 2.) When you are
ready to print, select the user number that you saved.
Reference Guide 8142/8160
Printer Options
Printer Options
Menu Tree
Menu Tree
Technical Info
Technical Info
Error Messages
Error Messages
Troubleshooting C
Troubleshooting C-7
Troubleshooting
Troubleshooting
Advertisement
Table of Contents
