Xerox 8142 Reference Manual page 37

Introduction
Each quality mode includes presets for the following options: Color mode; DPI; Carriage speed; Pass correction;
Print passes and Print direction.
When you select User mode, you can set each of the print mode options individually.
Quality modes are summarized in the table which follows. It is not necessary to set all the parameters unless you
want to create a user-defined print mode.
Mode Color
High Speed Color
Productivity Color
Fine Color
Enhanced Color
Ultrafine Color
High Speed - This mode generally is used when speed is more important than quality. Use it to check position,
layout, color, etc. It will rarely be used for finished quality images.
Productivity - This setting is for fast, average quality.
Fine - Fast, better than average quality.
Enhanced - Fast, very good quality (default).
Ultrafine - Average speed, best print quality.
To choose print quality
1 Press Setup/Print Mode/Quality Mode.
2 Choose the desired quality.
3 Press OK.
Reference Guide 8142/8160
Printer Options Menu Tree
DPI Passes
600 x 600 Two
600 x 600 Three
600 x 600 Four
600 x 600 Six
1200 x 600 Eight
Technical Info Error Messages
Printer Options
Direction Speed
Bi 10
Bi 10
Bi 10
Bi 10
Bi 10
Troubleshooting
2
Printer Options 2-5