Xerox 8142 Reference Manual page 40

Introduction
To set pass correction to auto
1 Press Setup Menu/Print Mode Menu/Pass Correction.
2 Choose Auto.
3 Press OK.
Carriage speed
Carriage speed lets you determine the number of dots per second that are laid down as the carriage moves over
the media.
To set the carriage speed
1 Press Setup Menu/Print Mode Menu/Carriage Speed.
2 Choose 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10. (10 is the fastest.)
3 Press OK.
Print direction
Print direction specifies whether the inkjets fire on both passes of the carriage over the print area (bidirectional),
or just on the return pass (unidirectional). If you're printing an image with heavy fill or shading, unidirectional can
reduce running and ink bleeding. If you're more concerned with printer speed, bidirectional firing can decrease
your printing time.
To change the print direction
1 Press Setup Menu/Print Mode Menu/Print Direction.
2 Choose Uni or Bi.
3 Press OK.
Reference Guide 8142/8160
Printer Options Menu Tree Technical Info Error Messages
Printer Options
Troubleshooting
2
Printer Options 2-8