Hyundai TUCSON Hybrid Owner's Manual page 697

Maintenance
Headlamp
Turn signal lamp
3. Push the wheel guard aside and
remove the bulb socket by turning it
counterclockwise.
4. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
5. Install a new bulb by inserting it into
the socket and rotating it until it locks
into place.
6. Push the socket into the assembly and
turn the socket clockwise.
7. Install the wheel guard in the reverse
order.
9-64
Daytime running light, position light
(LED)
If the LED lamp does not operate,
we recommend that the system be
inspected by an authorized HYUNDAI
dealer.
The LED lamps cannot be replaced as
a single unit because it is an integrated
unit. The LED lamps has to be replaced
with the unit.
A skilled technician should check or
ONX4090043
repair the LED lamp, for it may damage
related parts of the vehicle.
Type B (LED)
ONX4090044
(1) Headlamp (Low)
(2) Headlamp (High)
(3) Static bending light/Headlamp (High)
(4) Daytime running light/Position light
(5) Turn signal lamp
ONX4090022