Hyundai TUCSON Hybrid Owner's Manual page 485

Driver assistance system
Smart Cruise Control settings
Turning on Smart Cruise Control
Press the Driving Assist (
to turn on Smart Cruise Control. The
speed will be set to the current speed
on the cluster display.
If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
If your vehicle speed is between 0~
30 km/h (0~ 20 mph) when you press
the Driving Assist (
Smart Cruise Control speed will be set
to 30 km/h (20 mph).
If the driver changes the gear to a lower
gear, the driving speed may not reach
the set speed.
7-78
ONX4070032
) button
) button, the
Setting vehicle distance
Each time the button is pressed, the
vehicle distance changes as follows:
Distance 4 Distance 3
Distance 1
Information
If you drive at 90 km/h (56 mph), the
distance is maintained as follows:
Distance 4 -
approximately 52.5 m (172 ft.)
Distance 3 -
approximately 40 m (130 ft.)
Distance 2 -
approximately 32.5 m (106 ft.)
Distance 1 -
approximately 25 m (82 ft.)
The distance is set to the last set
distance when the engine is restarted,
or when Smart Cruise Control was
temporarily canceled.
OCN7060069
Distance 2