To release your seat belt:
Press the release button (1) in the locking
buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen, check
the belt to be sure it is not twisted, then
try again.
Rear center seatbelt
(3-point rear center seat belt)
To fasten your seatbelt:
1. Extract the tongue plate (A) from the
hole on the belt assembly cover.
OHI038142
2. Insert the tongue plate (A) into the
buckle (A') until an audible "click" is
heard, indicating the latch is locked.
Make sure the belt is not twisted.
3. Pull out the tongue plate (B) from the
pocket (C).
ONX4E030086
03
ONX4E030085
ONX4E030087
3-29