Hyundai TUCSON Hybrid Owner's Manual page 24

AC Charge
AC Charger
Actual charger image and charging
method may vary in accordance with the
charger manufacturer.
How to Connect AC Charger
1. Depress the brake pedal and apply the
parking brake.
2. Turn OFF all switches, shift to P (Park),
and turn OFF the vehicle.
3. Press center edge of the charging
door to open the charging door.
Information
If the charging door does not open because
ice has formed around it, tap lightly or
push on the door to break the ice and
release the door. Do not pry on the door. If
necessary, spray around the door with an
approved deicer fluid (do not use radiator
antifreeze) or move the vehicle to a warm
place and allow the ice to melt.
4. Check if there is dust on the charging
OLFP0Q5007K
5. Hold the charging connector handle
Charging connector AUTO/LOCK mode
The charging connector is locked in the
inlet at a different period according to
which mode is selected.
For more details, refer to "Charging
Connector AUTO/ LOCK Mode" in this
ONX4EPHQ011022L
chapter.
connector and charging inlet.
and connect it to the vehicle AC
charging inlet. Push the connector
until you hear a "clicking" sound. If
the charging connector and charging
terminal are not connected properly,
this may cause a fire.
Information
LOCK mode : The connector locks
when the charging connector is plugged
into the charging inlet.
AUTO mode : The connector locks
when charging starts.
01
ONX4EPHQ011029L
23