Hyundai TUCSON Hybrid Owner's Manual page 534

WARNING
Take the following precautions when
using Rear Cross-Traffic Collision-
Avoidance Assist:
For your safety, only change the
Settings after parking the vehicle at a
safe location.
If any other system's warning
message is displayed or audible
warning is generated, Rear Cross-
Traffic Collision-Avoidance Assist's
warning message may not be
displayed and audible warning may
not be generated.
You may not hear the warning sound
of Rear Cross-Traffic Collision-
Avoidance Assist if the surroundings
are noisy.
Rear Cross-Traffic Collision-
Avoidance Assist may not operate if
the driver applies the brake pedal to
avoid collision.
Even if there is a problem with Rear
Cross-Traffic Collision-Avoidance
Assist, the vehicle's basic braking
performance will operate properly.
When Rear Cross-Traffic Collision-
Avoidance Assist is operating,
braking control by the function
will automatically cancel when the
driver excessively depresses the
accelerator pedal.
Rear Cross-Traffic Collision-
Avoidance Assist does not operate
in all situations and cannot avoid all
collisions.
Rear Cross-Traffic Collision-
Avoidance Assist may warn the
driver late or may not warn the driver
depending on the road and driving
conditions.
The driver has the responsibility to
control the vehicle. Do not solely
depend on Rear Cross-Traffic
Collision-Avoidance Assist. Rather,
maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce driving speed or to stop
the vehicle.
Never deliberately operate Rear
Cross-Traffic Collision-Avoidance
Assist on people, animal, objects,
etc. It may cause serious injury or
death.
CAUTION
The brake control may not operate
properly depending on the status of
ESC (Electronic Stability Control).
There will only be a warning when:
- The ESC (Electronic Stability Control)
warning light is on
- ESC (Electronic Stability Control) is
engaged in a different function
Information
If the function assists you with braking,
the driver must immediately depress
the brake pedal and check vehicle
surroundings.
- Brake control will end when the
driver depresses the brake pedal with
sufficient power.
- After shifting the gear to R (Reverse),
braking control will operate once for
left and right vehicle approach.
07
7-127