Toro 41393 Operator's Manual page 79

Cleaning the Manifold Valve
1. Position the valve stem so that it is in the closed
position (B of Figure
Figure 105
1. Valve open
2. Remove the end-cap-fitting assemby and quick
connect from each end of the manifold body
(Figure 106 and
105).
2. Valve closed
Figure 107).
g027562
1. Stem retainer
2. Valve stem
3. Stem port
4. Stem retainer
5. Endcap fitting
6. Endcap seal O-ring (0.796
inch/0.139 inch)
79
Figure 106
Agitation-Valve Manifold
7. Back seating O-ring (0.676
inch/0.07 inch)
8. Valve-seat ring
9. Manifold body
10. Ball valve
11. Quick connect
g032550