Toro 41393 Operator's Manual page 26

Changing the Tank Settings
1. Press button 4 on the Settings screen to select
Tank settings (Figure
2. Press button 2 until you reach the item that you
would like to change
3. Use buttons 3 and 4 to set the desired value
(Figure 20).
Note:
Volume indicates the current amount of
liquid in the tank. The low-limit setting alerts
you when the tank volume has fallen below the
specified low-limit-tank volume. This setting
can be turned on or off. You can increase or
decrease agitation by pressing buttons 3 and 4.
Figure 19
19).
(Figure 20).
Figure 20
Changing Unit of Measure
1. Press button 2 on the Settings screen until you
reach Display settings and then press button 4
to select Display
2. Press button 1 or 2 until you reach Units and
then press button 4 to select Units.
3. Press button 1 or 2 until you reach the desired
unit and then press button 4 to select this unit.
•
English: mph, gallons, acre
•
Turf: mph, gallons, 100 ft²
•
SI (metric): kph, liter, hectare
Changing the Display Backlight or Contrast
1. Press button 2 on the Display settings screen
g034276
until you reach Backlight or Contrast
2. Use buttons 3 and 4 to set the desired value
(Figure 21).
g034286
26
(Figure 19).
(Figure
Figure 21
21).
g034287